My rotisserie demensions

[Rarerat]

There has been some interest in measurements of my homemade rotisserie on another board so I thought I would go ahead & post the info here as well..

Total cost was about 175 bucks and 6 hours of my time back when I did it. Most of the time was spent on designing the adjustable front mount so i could center the weight & the car wouldn't just take off on me once i had rotated the car to a certain point.

Rembrandt, I am not...




And a few pics to maybe make my chicken scratch make sense.

[67 LS1 Vert]

very cool. Thanks a lot. I will be stealing your dimensions some day when I build one for myself. One question, does the front have to be against the firewall or can it be adjusted back off of it a little and still work?

[Rarerat]

Originally Posted by 67 LS1 Vert

One question, does the front have to be against the firewall or can it be adjusted back off of it a little and still work?

Yes it could easily be adjusted back with the addition of 2 short pieces of tubing welded on the front mount. That's another thing on my to do list for changes that I never seem to get to. Same thing on the rear mount.